Approx 660 ft max per roll, some have less and will be sold at reduced price. 24 Reels on site in Whitehorse, Yukon more in Alberta.
Features
-
Extra abrasion resistant for rugged terrain and extreme conditions
-
Resistant to oil and chemicals
-
Integrated inner and outer coating of abrasion resistant Polyurethane
-
Heavy duty, high pressure applications
-
UV Stabilized
-
pH 3 – pH10 at ambient water temperature
-
Flexible in all weather conditions from -40 deg C to 70 deg C.(-40 deg F to 160 deg F)
-
Available in max lengths of 200m (660ft)
**ALTERNATIVE**
Some hoses have Oroflex 200 marked on them, here is the description:
APPLICATION:
- Dewatering operations
- Manure transfer
- Mining and fracking services
- Water bypass operations
- Refineries & chemical plants-(Resists Aromatics)
CONSTRUCTION:
Hose shall be made from 100% high tenacity synthetic yarn circular woven and completely, protected by extruded through the weave synthetic rubber, forming a single homogenous construction without the use of glues or adhesives of any type.
LINING PROPERTIES:
a. Ultimate Tensile Strength:
Tensile strength of the lining and cover shall not be less than 1750 psi (12,000 k Pa ).
b. Ultimate Elongation:
450 % minimum.
ABRASION RESISTANCE:
In very extreme conditions where abrasion is the most serious concern OROFLEX 20 would extend hose life. Hose should have excellent abrasion resistance when tested with TABER abraser Wheel H-18 and 1000gr load.
TEMPERATURE RANGE:
- 22°F (-30°C) to 176°F(+80°C)
OZONE RESISTANCE:
Hose shall show no visible signs of cracking of the lining or cover when tested in accordance with ASTM D1149- 64 (R1970), ASTM D518 Procedure B, 100pphm/118 F/70 hours.
CHEMICAL RESISTANCE:
Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils, alkalis, acids and greases must have no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data on request of purchaser for unique applications
HEAT RESISTANCE:
The hose when subjected to a static pressure of 100 psi ( 700 k Pa ) shall be capable of withstanding a surface temperature of 1112 F ( 600°C) (for a minimum of two minutes without rupture or damage to the synthetic reinforcement.
REPAIRABILITY:
Cover damage, small holes and punctures are repairable with use of REPOKIT and Vulcanizer. Full instructions for use supplied on request.
LENGTHS:
Standard 50’ (15m), 100’ (30m), 200’ (60m). special lengths up to 660’ (200m)
Part # |
Nominal D |
WP* |
Burst |
End Pull |
Weight |
Thickness |
Request a Quote |
in |
psi |
psi |
lbs |
lbs/ft |
in |
008-1922-0150 |
12 |
125 |
375 |
31.526 |
3.55 |
0.170 |
Request Quote |
* Working Pressure can be raised up to 150 psi (10 bar) if a safety ratio of 2.5 over burst pressure can be accepted.